Open

October Webinar: Surficial Slope Stability with Engineered Earth Armoring System- Part 1



ARMORMAX® is an Engineered Earth Armoring Solution used for surficial slope stability as well as permanent erosion control in vegetated and un-vegetated applications. With a verified carbon footprint up to thirty times less than rock riprap or concrete, ARMORMAX® 75 is an environmentally friendly and cost effective alternative to traditional, “hard” armouring solutions used for stabilising the face of steep slopes and flood protection levees.  It is designed to optimise rapid vegetation growth (where needed) and keep the soil in place, thereby resisting mobilisation of soil masses associated with sliding failures of slopes. This system can be used for shallow failures and deep-seated rotational failures, and will be designed to meet project’s hydraulic, geotechnical, design life, environmental and economic needs.

Part 1 of this webinar series will feature the 20 years of research and field trials, sustainability evaluation, design guidelines, and appropriate applications of this system.

Register Now Button

WHO SHOULD ATTEND 

Civil and Geotechnical Engineers that commonly use traditional hard engineering methods to stabilise surficial slope stability and flood protection levees will benefit from this presentation.

SPEAKER BIO

RANDY THOMPSON – PROPEX GEOSOLUTIONS

Randy Thompson is a Professional Engineer with over 20 years of experience educating the engineering     community around the world on the appropriate applications of the ARMORMAX® 75 System.

 

 


 AMIR SHAHKOLAHI –  GLOBAL SYNTHETCS 
Amir has a Bachelor’s and Master’s degree in Civil and Environmental Engineering . As a designer, project   manager and researcher, he has been involved in Geosynthetic industry over the last 15 years. He is now the Vice-Chair of the Australian Geomechanics Society (AGS) Queensland chapter, member of the International Geosynthetic Society Technical Committees for reinforcement, Stabilisation, and Barriers. He is also an Industry Board member of the Australian Pavement Research Hub, member of the Standards Australia Technical Committee CE/032-Reinforced fill structures working group, and guest lecturer at Sunshine Coast University and University of Wollongong.



If you would like further information
about any of our products please

Contact Us
Contact Us