Use & Purposes
ProGrid® geogrid is formed by punching holes and stretching a stiff plastic sheet to form a geogrid with uniform openings to contain and absorb lateral forces exerted on the reinforcement from implied loads. The transfer of implied loads to the geogrid is by way of a combination of friction and interlocking with the surrounding granular particles. ProGrid® geogrids provide a stiff, high modulus reinforcing layer to allow the construction of roads and
other amenities over weak subgrades.
For more information please refer to the Technical Downloads located on the right.
The Modular Tank for All Stormwater Applications: ProTank®
When it comes to stormwater, sustainable environmental management stems from keeping water at its source. Having a containment system installed where stormwater naturally collects makes good...Read More
JUTELOK™ solves erosion issues at Ardmore Park
The Ardmore Park development in Ellenbrook, northeast of Perth, included a steep, sandy site at the rear of the residential blocks. The soil was very poor quality at the beginning of the project, and...Read More
Propex Roadshow Follow Up June 2019
In conjunction with our valued partners Propex, we recently conducted a series of technical presentations on Turf Reinforcement Mats (TRMs) and Engineering Earth Armouring Solution for slope...Read More
Bi-planar vs Tri-planar geonets: Benefits in landfill leachate applications
Government data suggests that there are around 500 officially registered landfill sites in Australia. Although this number is declining, the average size of each site is increasing. Approximately 75%...Read More